What is an oil feed pipe?
In turbocharged engines, the oil feed pipe (or line) is connected to the engine lubrication system. Its main function is to secure appropriate lubrication needed for the turbocharger unit and specifically, for its shaft.
What is a turbo oil line?
The turbo oil drain is a pipe that connects your turbo chargers oil gallery to the engine, this drains the oil away from the bearings inside the turbo charger. The pipe is connected typically to the sump or the lower portion of the engine block.
Do Turbos have an oil feed?
Much in the same way that an artery supplies blood to the heart, the oil feed pipe supplies engine oil to the turbo. Like blood to the human body, oil is vital to a turbocharger’s operation.
Why does a turbo leak oil?
Oil leaks can be caused by a variety of factors, the main factor being incorrect pressure within the compressor and turbine housings. Oil leaks can cause catastrophic damage to the bearing systems and occur within seconds of the turbocharger commencing operation.
How long will a turbo run without oil?
Engines can work without oil, but the effect is so damaging they are only capable of running for less than 30 minutes until failing – and in most cases, it’s a lot quicker than that.
Why is my turbo not getting oil?
Oil Filter Build-up: Deposits on your oil filter can prevent oil from flowing properly to your turbo. Make sure that your filter is cleaned and replaced to help keep this from happening. Low Oil Levels: Too little oil in your engine can likewise keep the proper amount from reaching your turbo.
How do you know if your turbo is burning oil?
Oil can get into your exhaust if your turbo unit develops cracks, or damage to its internal seals. The extra oil will burn off in a blue or grey hue. You’re more likely to see these heavy fumes when using the turbocharger. Rev your engine and see if excessive smoke is emitted.
What is an oil return line?
The oil return hose returns the oil directly back to the oil pan, after it passes through the turbocharger. These hoses are crucial in keeping your vehicle operating properly. Common symptoms of a failing oil return hose include cracks or bulges on the hoses and visible oil leaking from the car.
Do Turbos need oil pressure?
An oil restrictor is recommended for optimal performance with ball bearing turbochargers. Oil pressure of 40 – 45 psi at maximum engine speed is recommended to prevent damage to the turbocharger’s internals.