How much HP does a 400 Ford have?
Factory Power Ratings
|Model Year||Engine||Horsepower @ RPM (SAE net, except ’71)|
|1978||351M (car/truck)||152 @ 3400 / 156 @ 4000|
|1978||400 (car/truck)||160 @ 3800 / 158 @ 3800|
|1979||351M (car/truck)||151 @ 3400 / 156 @ 4000|
|1979||400 (car/truck)||159 @ 3800 / 159 @ 3800|
Is the Ford 400 a good engine?
A well maintained 400 can last as good as any Ford engine. When Ford first started installing them in cars and trucks they unfortunately didn’t live very long in my area. The locals were used to regularly winding up their Windsor small blocks and their big blocks with no problems.
What is a Ford 400 modified engine?
The 400 was designed as high torque, low RPM engine that was a smaller, more efficient, and lighter alternative for the big Ford 385 engines, the 429 and 460, for use in Ford’s medium and large size cars.
What engine family is the Ford 400?
The 335 series engines were used in mid- and full-sized cars and light trucks, (351M/400 only) at times concurrently with the Windsor small-block family, the 351 Windsor, in cars. These engines were also used as a replacement for the FE V8 family in both the car and truck lines….Ford 335 engine.
|Ford 335 V8|
|Successor||Ford Windsor V8|
How much torque does a 400 Ford have?
Breaking in the Ford 400M Engine Equipped with the stock two-barrel intake and Holley carb, the 400M produced peak numbers of 265 hp at 4,100 rpm and 412 lb-ft at 2,900 rpm. Torque production from the 400M exceeded 400 lb-ft from below 2,000 rpm (we didn’t load it lower than 2,000 rpm) to 3,200 rpm.
What cars came with a Ford 400?
The Ford 400 was featured in the following models:
- Ford Custom, Galaxie, and LTD in 1971.
- Mercury Monterey, Marquis, and Brougham in 1971.
- Ford Torino and Mercury Montego in 1972 through 1979.
- Ford Thunderbird, Ford F-series pickups, Lincoln Continental, and the Lincoln Mark V in the late 1970s.
How many liters is a Ford 400 engine?
Ford called the engine 400 cu in but it actually displaced 402 cu in (6.6 L). To accommodate the longer stroke, Ford engineers increase the block deck height to 10.297 inches compared to the 351C’s 9.206 inches.
How much HP can a 400 small block make?
With our low-compression, power-adder friendly 400-inch small-block easily exceeding 525 hp, it was time for some boost. And that’s where things start to get very interesting.
How much power does a 400 small block have?
With timing and jetting maximized, the 400 managed to produce 458 lb-ft of torque at a still low 4,000 rpm, while kicking up the peak horsepower to just 401 at 5,400 rpm.
How much HP does a small block 400 have?
In case you missed the story, the best power numbers were gained with a set of GM Performance Parts Vortec heads supplied by Scoggin-Dickey, and even then the 400 small block Chevy managed only 401 hp and 458 lb-ft of torque. We were underwhelmed.