How configure BSNL broadband WiFi modem?
Modem configuration:
- In the Internet Explorer, type 192.168.1.1 and press enter.
- Type username as admin and password as admin and press OK.
- Click “Advanced Setup”
- Click Edit button against VPI/VCI -0 and 35.
- Click Next in the above screen.
- Select PPP over Ethernet (PPPoE) in the above screen.
How can I configure my UTStarcom modem for BSNL broadband?
Setup BSNL Type 2 ADSL Modem WA3002 -g1 UTStarcom
- Connect to computer.
- Login to Setup Page.
- Click on Advanced Setup.
- Edit VPI settings of PPPoE connection in WA3002 BSNL Modem.
- Select PPPoE from the list of network protocols and click next.
- BSNL Username and Password.
- Choose Save/Reboot WA 3002 -g1 ADSL BSNL Modem.
How do I configure my teracom modem?
Steps to configure BSNL Teracom Wireless settings are:
- Login to BSNL Teracom Wireless Modem. The default modem IP address is 192.168.
- Go to BSNL Wireless Settings Page. Click on Wireless Network which located under Configuration tab.
- Enable Wireless Security in BSNL Teracom Modem.
How do I reset my modem to default settings?
If you have messed up the settings or unable to internet, just reset the mode by restoring the default settings either through modem control panel or a reset hole at the back side of mode.
How to access the settings of a WiFi router?
How to Access Your Wi-Fi Router’s Settings. 1 Find Your Router’s IP Address. You log into your router’s firmware through a browser. Any browser will do. At the address field, type the IP address 2 Username and Password. 3 Change Router Settings. 4 Change Router Login. 5 Review Wi-Fi Password.
What information do I need to set up a Wi-Fi network?
These include the network name and password, the security level, and the Wi-Fi password. You can also set up parental controls, create a guest network, and manage attached devices. Just remember to apply any changes before you move on to the next screen.
How does a DSL modem connect to the Internet?
In this mode once the DSL link is steady the modem remembers the username and password and auto connects to internet when switched on. If you are using a username and password to connect to internet with DSL modem (like huawei) then that means you are most likely to be using Bridged mode.