What does system on 2 mean on a Emerson thermostat?
1 “System On” indicates when heating or cooling stage is energized. “System On +2” indicates when a second stage is energized. 2 The word HOLD is displayed when the thermostat is in the HOLD mode.
How do I reset my Emerson Blue thermostat?
To reset, the System Switch must be in Cool or Heat. Simultaneously press and buttons for approximately 10 seconds until the display goes blank. If the thermostat has power, has been reset and still does not function correctly contact your heating/cooling service person or place of purchase.
Should I run my heat pump on auto or heat?
use “AUTO” mode. It’s natural to think “AUTO” mode would be a more efficient setting. But if you use it, your unit runs the risk of toggling unnecessarily between heating and cooling. Your heat pump will run most efficiently when set to “HEAT” in winter and “COOL” in summer.
Should a heat pump be left on all the time?
While heat pumps are the most cost effective way to use electricity to heat your home during the cooler months, leaving them running day and night is not economically efficient. According to Energywise, you should switch off your heat pump when you don’t need it. This is to avoid excessive energy waste.
How does a 2 stage thermostat work?
A two-stage thermostat increases efficiency by running the first-stage burners as long as possible. If the first-stage burners cannot maintain a 6- to 8-degree temperature rise in the house, the thermostat fires up the second-stage burners.
What is the difference between a 1 stage and 2 stage heat pump?
A single stage-compressor only lets the heat pump cool/heat at full blast. A two-stage compressor allows the heat pump to cool or heat at different levels: High (full blast) and low for milder days. OK, so what’s the big deal about two-stage? Well two-stage heat pumps run more often, while using less energy.
What should I set my heat pump thermostat to?
For best efficiency and to save money, set your thermostat at 68 degrees while you are home in the cool weather months of the year. During hot months it is best to set your thermostat to a temperature as warm as you can tolerate without discomfort.
Why are 2 stage heating thermostats used on heat pumps?
Improved humidity control — A two-stage heat pump runs for longer cycles than a heat pump with a conventional one-stage compressor. This gives the system more time to remove humidity from your air. In fact, a two-stage system can remove nearly twice the humidity as a single-stage heat pump.