What does check SP WIRE mean on Onkyo?
short-circuited
If “CHECK SP WIRE” appears on the display, the speaker cables may be short-circuited. Make sure bare speaker wires are not touching each other or the back panel of the unit, then turn the unit on again. If “NG” is displayed, immediately unplug the power cord from the wall outlet and contact your dealer.
What is SP in Onkyo receiver?
Allows you to change the speaker configuration such as existence of subwoofer, crossover frequency, and so on. Settings are automatically configured if you use the Automatic Speaker Setup.
What is SP wire?
SP wire is a hybrid electrode micro EDM wire consisting of a high-strength core and a highly-conductive outer shell, combining the advantages of tungsten-wire electrodes and brass-wire electrodes.
Does Onkyo TX NR636 support Dolby Atmos?
The Onkyo TX-NR636 has a laundry list of features including Dolby Atmos support and High-Resolution Audio streaming; HDMI 2.0 and HDCP 2.2 means the receiver is potentially more future-proof than its competitors; very good sound quality; a phono input is included.
How do I reset my Onkyo receiver protect mode?
How to Reset Onkyo Protect Mode
- Unplug the receiver’s power cord from the wall and leave unplugged for at least one hour.
- Reconnect the power cord after at least one hour has passed.
- Turn the receiver on and turn the volume to the maximum setting.
- Turn the volume back to the minimum setting and turn off the receiver.
What is AMP DIAG mode?
If this is the case, when you turn the unit on again, “AMP Diag Mode” will appear on the main unit’s display. The unit will then enter a mode that detects abnormal conditions. If no problems are detected, “AMP Diag Mode” will disappear and the unit will return to a normal state.
What does SP mean audio?
You can select the speaker pattern according to the speaker system which you are using.
What is multiplex input channel?
Input Ch (Mux) (Multiplex Input Channel) Default Value: Main. Set the audio channel or language to output when listening to multiplex audio or multilingual TV broadcasts etc.
Why does my Pioneer Elite receiver keep shutting off?
If a receiver is not getting enough current, it will turn itself off. If your receiver shares a wall outlet with another high-current appliance (such as a refrigerator, air conditioner, heater, or vacuum), the receiver may shut itself off when there is insufficient current.
Does Onkyo TX NR636 support 4K?
The TX-NR636 features Qdeo™ technology from Marvell to upscale low-res video to liquid-smooth 1080p (for HDTV) and 4K (3840 x 2160 pixels) with a compatible display.
How do I reset my Onkyo TX nr636?
Press and hold down 2HOME until the 3 remote indicator lights (about 3 seconds). Within 30 seconds, press 1RCV again.
How do I reset my Onkyo nr636?
What is a SPL subwoofer box?
SPL car-audio systems are built around what people call a “Burp-Box” which is a Sub-Woofer Box built to get the highest dB rating possible and usually sound absolutely horrible for music!
What is an SPL sound system?
SPL stands for sound pressure level and is also commonly referred to as efficiency and sensitivity. This parameter represents how loud a speaker is. A higher SPL equates to a louder speaker. A speaker is placed on a baffle with the cone facing into an anechoic chamber (room designed to stop sound reflections).