Can alucobond be used for roofing?
ALUCOBOND® has been a market leader in the production and supply of aluminium composite panels world-wide since 1969. It is a highly versatile roofing and rainscreen cladding panel system that is highly durable while also having great aesthetic qualities with its large variety of colours.
Is alucobond the same as ACM?
ALUCOBOND is the original aluminum composite material (ACM) used in the architectural and building cladding industries.
Where is alucobond manufactured?
The ALUCOBOND® product range includes ALUCOBOND® PLUS, ALUCOBOND A2 and ALUCORE® aluminium composite materials manufactured by long-term partner, 3A Composites, Germany.
Is alucobond waterproof?
ALUCOBOND® A2, just like all the products of the ALUCOBOND® family, allows simple processing, is impact-resistant, break-proof and weatherproof and, above all, non-combustible.
Can you paint alucobond?
How is paint applied to ALUCOBOND® PLUS? The painted ALUCOBOND® PLUS finishes are applied via a coil coating process. This involves coiled aluminum sheet which is processed through cleaning and pretreatment of the aluminum followed by reverse roll application of the paint.
How do you clean Alucobond panels?
Most panel manufacturers recommend using a really soft applicator like a sponge or window cleaning mop with a mild detergent like dishwash or other surfactant-based cleaners to clean the surface.
How do you cut alucobond?
ALUCOBOND® can be cut to shape using CNC machining centres, water jet cutting machines, copy routers and jig saws. Shearing can be done with a guillotine. To prevent surface damage, use protective pads between down-holders and ALUCOBOND® surface and adjust to minimum down holding pressure.
What is alucobond thickness?
ALUCOBOND® PLUS Aluminium Composite Material (ACM) shall be 3mm/4mm/6mm thick and consist of 2 layers of 0.5mm thick aluminium sandwiching a mineral filled fire-resistant core containing 70% non-combustible mineral filling.
Is alucobond flammable?
ALUCOBOND® A2 is the only non-combustible aluminium composite panel that fulfills the respective standards worldwide.
How do you paint Aluminium composite panels?
Painting on Aluminum Composite Panels
- Remove the protective film from the coated side slowly and carefully to avoid static build-up.
- Pre-clean the panel surface with ethyl or isopropyl alcohol, using non-colored cloth for best results.
- Scuff the surface with abrasive paper, preferably using a grain size of 360 grit.
Can you paint on aluminum composite?
The two most common methods used to change the colours of aluminium composite panels; flood coat in sign vinyl and spray painting. Getting a panel re-coloured is a relatively straightforward affair without any hidden mastery skill.
Does alucobond fade?
This material does not fade and is able to withstand any aggressive conditions caused by natural forces. Heat or cold cannot impact alucobond cladding. Manufacturers assure that the temperature range for the product is from minus 50 to plus 80 degrees Celsius.
How do you clean Aluminium composite panels?
The way it is presented in most sites and articles is that the aluminum composite panel should be cleaned using a damp, soft piece of cloth. Water used should be about 20 to 30 degrees and combined with a neutral detergent or minimal amount of soap.
How do you bend an Alucobond sheet?
ALUCOBOND® can be bended using a bending press.
- The minimum required radius is r = 10 x t (t = panel thickness).
- The spring-back effect of ALUCOBOND® is greater than that of a solid aluminium sheet.
- The die edges should be rounded and smooth.
How do you connect Aluminium composite panel?
This method of joining panels involves cutting a rebate in one of the panels being joined – usually the wall panels – such that the other panel neatly fits into the rebate. Aluminium trim – such as the 40x40x1. 6mm in the image below – is then used to secure the join using construction adhesive such as Fixtech..
Can alucobond be curved?
ALUCOBOND® can be bended using a bending press. The minimum required radius is r = 10 x t (t = panel thickness). The spring-back effect of ALUCOBOND® is greater than that of a solid aluminium sheet. The die edges should be rounded and smooth.