How do I fix the error code on my Samsung washing machine?
Here is what to check when you get the LE error code:
- Be sure the door is closed.
- Be sure the door seal is clean and free of debris.
- Be sure the water hose connections are tight.
- Be sure the O-rings on the water hoses are installed properly and not torn.
How do I clear the 4E code on my Samsung washer?
How to resolve 4E or 5E codes on Samsung Washer
- Check the water hose. A problem with the water supply is usually the result of low water pressure or a low flow rate on the mains water supply to the machine.
- Check the water supply.
- Clean the water hose mesh filter.
- Clean the dispenser drawer.
What does error 4E mean on Samsung washer?
As mentioned, the errors 4E and 4C indicate that your washing machine is not receiving enough water, and the issue is usually caused by a problem with one of the washer’s hoses.
How do I fix error code 4E?
The first step is to turn your Samsung washer off for a few minutes before turning it back on. Often the 4E error code will resolve itself by simply turning the power off and on, as this resets your washer.
Is there a reset button on Samsung washing machine?
Reset your washing machine There really isn’t a way to reset the washing machine. What you can do instead is power cycle it: Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again.
What is E4 error code?
What Is An E4 Error Code? Technically, the E4 error is not an error at all. It actually tells you, your unit is going into defrost mode. That does, however, mean that something has caused your unit to get too cold.
What does E4 mean in washing machine?
Water supply error
What does the error code means and how to fix it?
|New Code||Old Code||Cause|
|E4||E1||Water supply error. The appliance is not detecting that the unit is filling with water.|
|4E1 4E2||4Ed||Water temperature issue|
|6E||Water heater not functioning|
What does E04 mean on a washing machine?
Error code E04 means the washing machine has detected that there’s too much water in the drum.