Is the 318 Magnum a Hemi?
The engine was predominantly used in Dodge trucks and Jeep Grand Cherokee’s from 1992 until 2003 when it was replaced by the Hemi. The 5.2 Magnum is also commonly referred to as the 318 Magnum due to its 318 cubic inches of displacement.
How much horsepower does a 5.2 liter V8 have?
The 5.2 L was the first of the Magnum upgraded engines, followed in 1993 by the 5.9 L V8 and the 3.9 L V6. At the time of its introduction, the 5.2 L Magnum created 230 hp (172 kW) at 4,100 rpm and 295 lb⋅ft (400 N⋅m) at 3,000 rpm.
Is the 5.2 V8 a good engine?
5.2 Magnum Reliability The 5.2 Magnum used in Dodge trucks and Jeeps is a pretty solid engine. It doesn’t suffer cylinder head cracks to the same extent that the 5.9 Magnum does. Additionally, the internals and major engine components seem to be fairly strong and adequate for good longevity at stock power levels.
Can I swap a 4.7 Dodge Magnum with a 5.2 Dodge Magnum?
you will have to change out the transmission, cooling system and all wiring and everything else. nothing is compatible between the 4.7 and the 5.2/5.9.
When did dodge come out with the 318 engine?
The 318 is the most common version of the A engine, produced from 1957 through 1967 when it was replaced in all markets by the LA 318. Only Plymouth used this 318 in 1957 and 1958, but it was shared with the other Chrysler divisions from 1959 on.
How much does it cost to rebuild a 318 engine?
The price of a rebuilt engine depends on factors such as the car you drive, who you choose and where you live. On average, for a rebuilt engine, with a warranty, the price is going to be anywhere from $500 if your current engine can be worked on to as much as $3,500 or more for a complete swap.
How much horse power does a 318 Dodge have?
How much horsepower does a 318 Dodge motor have? The 318 four-barrel, used on police pursuit and other cars, produed 165 hp and 240 lb-ft of torque. What cars had the 318 engine? The 318 engine first was used in the Dodge Dart, the Dodge Demon, the Plymouth Barracuda, the Scamp, and the Duster.
What is the oil capacity of a 318 Dodge engine?
The Chrysler/Dodge 318 Magnum is a 5.2 l (5,211 cc, 318.0 cu.in.) natural aspirated V8 90° four-stroke gasoline engine from Chrysler LA/Magnum-family. This engine was manufactured from 1992 up to 2003.
When did Dodge discontinue the 318?
The Dodge 318 V-8 engine was produced by the Flint, Michigan-based Chrysler Corporation, now Chrysler LLC, from 1967 to 2002. The 318 was not just limited to Dodges, but also powered Plymouth and Chrysler cars as well. The engine was remarkably efficient, durable and proved to be Chrysler’s mainstay for many of its vehicles over the decades.